【Detailed introduction】

This model for inorganic extinction powder, can be used for wood paint, amino baking paint, polyurethane paint, polyester paint in the extinction of additives, has the following characteristics.
FM-2801 is improved from FM-6601 and FM-6602, is a new extinction powder, high transparency (with the imported the same advantages), extinction is especially good, oil absorption of small, large porosity etc..
A high efficiency -----FM-2801, extinction of various sizes of particles just meet the coating compositions, extinction efficiency is high, the distribution of the particles is narrow and symmetrical extinction efficiency high.
Two, good transparency, FM-2801 extinction powder through scientific arrangement, FM-2801 refractive index similar to the film forming resin refractive index, extinction of transparent paint to avoid possible mist.
Three, easy dispersion, the particle size distribution control make it easily dispersed in the coatings, the standard for dissolving machine. Taking 1200r/mm (blade speed 5-6m/s) impeller dispersed for 10 to 15 minutes, can be fully dispersed, pay attention to the temperature control in 50 degrees below C.
Four, the film has no effect, extinction powder purity, particle integrity, ground resistance
The characteristics and the reasonable choice of matching models, not only on the film recoat adhesion without impact, abrasion resistance, and the coating is smooth, good hand feeling, luster good consistency.
Five, the recommended range ------1 wood paint, paint, paint the 2 3, 5 4 coil coatings, waterborne wood etc..
Six, packaging and ----FM-2801 packaging is 5 kg, 10 kg.