【Detailed introduction】

The model for the organic extinction powder, can be used for glass paint, wood paint, elastic paint, polyurethane paint, polyester paint in the extinction of additives, has the following characteristics.
FM-100 is improved from FM-6601 and FM-6602, is a new extinction powder, has the advantages of high transparency, extinction is especially good, oil absorption of small, large porosity etc..
FM-100 index

A high efficiency -----FM-100 extinction, various sizes of particles just meet the coating compositions, extinction efficiency is more high, particle size distribution is narrow and symmetrical extinction efficiency high.
Two, good transparency, FM-100 extinction powder through scientific arrangement, FM-100 refractive index similar to the film forming resin refractive index, extinction of transparent paint to avoid possible mist.
Three, easy dispersion, the particle size distribution control make it easily dispersed in the coatings, the standard for dissolving machine. Taking 1200r/mm (blade speed 5-6m/s) impeller dispersed for 10 to 15 minutes, can be fully dispersed, pay attention to the temperature control in 50 degrees below C.
Four, the film has no effect, extinction powder purity, particle integrity, ground resistance
The characteristics and the reasonable choice of matching models, not only on the film recoat adhesion without impact, abrasion resistance, and the coating is smooth, good hand feeling, luster good consistency.
Five, the recommended range ------1 glass paint, wood paint, 3 of the 2 Paints, coil coatings, 5 4 of waterborne wood, 6 elastic paint, 7 paint etc.
Six, packaging and ----FM-100 packaging is 10 kg, 5 kg.